62
Dual Cleaner
To find out the month and year of
manufacturing of the lil SOLID device you
should call the Customer Service Centre and
tell the 14-digit alphanumeric code placed
under the cap of the device.
Storage conditions: in dry, conditioned
premises, temperature regime: from 5 °C to
30 °C relative humidity less than 70%.
Customer Service Centre: 080 96 96
Importer: Philip Morris Zagreb d.o.o.,
Heinzelova 70, 10000 Zagreb, Croatia
BATTERY REMOVAL INSTRUCTIONS
(FOR DISPOSAL AND RECYCLING)
Battery must not be removed by the
consumer. At the end of product life, only
an authorized recycler may safely remove
battery by using the following steps.
Model S-MONO-V11
Step 1: The device should be fully discharged
before disassembling it.
Step 2:
Detach the lower plate at the bottom side
with a tool, and then remove the
adhesive tape.
Step 3: Remove 2 screws.
Step 4:
Disassemble the housing from the internal
components.
Step 5: Remove all screws and detach Frame
Parts.
Step 6:
Remove rubber and disconnect 2 connectors,
then detach PCB from the device body.
Step 7: Remove the battery and dispose of it
according to local regulations.
To Next Page
Loading...
