Page 23 of 71
Driving to favourite positions
After saving the favourite positions, the user can reach the positions simply by tilting/pressing the DPG1M.
1. Tilt/press and hold - when a saved position has been reached, the desk stops.
2. Release DPG1M within one second.
This way the user can easily change between sitting and standing height without looking at the DPG1M in the
meantime.
When the desk stops at a favourite position, the user can
• continue to tilt/press the DPG1M for one second
or
• release the DPG1M and immediately tilt/press it again.
The desk will move past the favourite position and continue its movement.
Automatic driving to favourite positions
(only possible for “Full version” with “Automatic drive” enabled in the app)
1. Double-tap DPG1M to let desk adjust automatically to first position in direction of double-tap.
2. Simply tap DPG1M once to stop driving of desk between two favourite positions.
Figure 11: Tilt/press to drive desk
Figure 12: Double-tap to automatically adjust the desk to a favourite position
To Next Page
Loading...
