Page 44 of 71
Resetting the reminder
1. Press symbol for eight seconds to reset reminder to default values.
After five seconds the display shows a countdown and the light strip flashes red when the reminder is reset.
Key lock
The operation of DPG1C can be locked to prevent unintended driving of the desk. As default the key lock is
disabled. If enabled, it automatically locks the DPG1C after a configured amount of time. The key lock function
can also be configured to indicate attempt to operate the locked DPG1C by showing a red light and a .
Unlocking DPG1C
1. Press , and in sequence (max. one second between each button press).
Figure 41: Reset reminder
To Next Page
Loading...
