Lincoln Global CROSS COUNTRY 300 SAFETY 12362 User Manual

Operator’s Manual
Cross Country
TM
300
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10210 | Issue D ate June-15
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
12362
Need Help? Call 1.888.935.3877
to talk to a Service Representative
Hours of Operation:
8:00 AM to 6:00 PM (ET) Mon. thru Fri.
After hours?
Use “Ask the Experts” at lincolnelectric.com
A Lincoln Service Representative will contact you
no later than the following business day.
For Service outside the USA:
Email: globalservice@lincolnelectric.com
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)

Lincoln Global CROSS COUNTRY 300 SAFETY 12362 Specifications

General

Output Current Range	30-300A
Rated Output	300 A
Wire Feed Speed Range	50-700 IPM
Output Voltage Range	32V
Input Voltage	208/230/460V
Input Phase	1
Input Frequency	60 Hz
Duty Cycle	60%
Dimensions	H: 30.5 in (775 mm) x W: 25.5 in (648 mm) x D: 47 in (1194 mm)
Processes	MIG, Flux-Cored

Summary

SAFETY

GENERAL SAFETY PRECAUTIONS

Essential safety guidelines covering fumes, personal protection, and special situations.

SPECIFIC HAZARDS

Warnings and precautions related to electric shock, arc rays, and hazardous fumes/gases.

FIRE AND EXPLOSION PREVENTION

Measures to prevent fires and explosions caused by sparks, and compressed gas cylinder safety.

INSTALLATION

ENGINE AND BATTERY SETUP

Procedures for pre-operation engine service, oil, fuel, and battery connection.

ELECTRICAL AND AUXILIARY CONNECTIONS

Connecting power, grounding, auxiliary outlets, and standby power.

OPERATION

OPERATING SAFETY AND FUELING

Safety precautions for operation and procedures for adding fuel.

ENGINE AND WELDER CONTROLS

STARTING AND STOPPING THE ENGINE

WELDING MODES

MAINTENANCE

ROUTINE MAINTENANCE AND SAFETY

Safety precautions and daily/periodic maintenance tasks for the engine and machine.

ENGINE MAINTENANCE

TROUBLE SHOOTING

USING THE TROUBLESHOOTING GUIDE

ENGINE STARTING PROBLEMS

ENGINE RUNNING PROBLEMS

POWER AND CONTROL ISSUES

DIAGRAMS

WIRING AND DIMENSION DIAGRAMS