Lincoln 2014 MKZ Hybrid - High Voltage Battery

Disabling the High-Voltage Battery
E159506
1. Fold down the rear seats.
2. Locate the access door and remove
the plastic cover.
E171513
3. If equipped, remove the outer lever on
the service disconnect. Pull the end of
the lift tab toward the front of the
vehicle.
E147234
4. Slide the handle on the service
disconnect outboard to the right.
E146133
5. Pull the handle toward you and remove
the circuit from the vehicle to disable
the high-voltage battery.
6. Reverse this procedure to reinstall the
high-voltage service disconnect and
the outer lever to the service
disconnect.
Reactivating the High-Voltage Battery
Note: If you have manually disconnected
your high-voltage shut off circuit, you will
need to reconnect the circuit before you
can reactivate it. The vehicle will detect if
the electrical system is safe and reactivate
automatically.
168
MKZ (CC9)
High Voltage Battery