2. Select Neutral Tow under the Vehicle
Settings menu in the information
display. See General Information
(page 96).
3. Press and hold the OK button to start
the neutral tow process.
4. Press the brake pedal and select N on
the push-button transmission.
5. Turn the ignition off by pressing the
engine START button without pressing
the brake pedal.
If the process is completes successfully:
• the N on the push-button transmission
blinks slowly
• Neutral Tow Engaged turn ignition
off for towing appears in the
information display.
Note: If the parking brake is applied,
Neutral Tow remove park brake for
towing appears in the information display.
Note: Do not exceed 65 mph (105 km/h).
Note: Start the engine and allow it to run
for five minutes at the beginning of each
day and every six hours (or fewer). Shut
the engine off and verify that Neutral tow
engaged appears in the display before
continuing to tow.
Exit Neutral Tow mode, make sure the
ignition is on (engine can be on or off),
press the brake pedal and select P on the
push-button transmission.
If the process is completed successfully,
Neutral Tow disengaged appears in the
information display and both the
instrument cluster and push-button
transmission display P.
219
MKZ (CC9) , enUSA
Towing
To Next Page
Loading...
