14. Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page 305).
Stowing the flat tire
You can stow the full-size road wheel in
the spare tire compartment.
1. Lift the carpeted wheel cover at an
angle to access the spare tire
compartment.
2. Place the wheel in the spare tire well
with the valve stem facing down. Use
the mini-spare bolt to secure the wheel
through one of the lug holes.
3. Place the jack, tools and foam block
back into the spare tire compartment.
4. Replace the carpeted wheel cover.
To Next Page
Loading...
