EasyManua.ls Logo

Lincoln 2016 MKT - Jump-Start Procedures

Lincoln 2016 MKT
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
FUEL SHUTOFF:
In the event of a moderate to severe collision, this vehicle includes a fuel pump shutoff
feature that stops the flow of fuel to the engine. Not every impact will cause a shutoff.
Should the vehicle shut off after a collision, you may restart the vehicle. For vehicles
equipped with a key system:
1. Switch off the ignition.
2. Switch on the ignition.
3. Repeat steps 1 and 2 to re-enable the fuel pump.
For vehicles equipped with a push button start system:
1. Press the START/STOP button to switch off the ignition.
2. Press the brake pedal and press the START/STOP button to switch on the ignition.
3. Remove your foot from the brake pedal and press the START/STOP button to switch
off the ignition.
4. You can either attempt to start the engine by pressing the brake pedal and the
START/STOP button, or switch on the ignition only by pressing the START/STOP
button without pressing the brake pedal. Both ways re-enable the fuel system.
JUMP-STARTING:
The battery is located on the driver’s side of the engine compartment.
Ground Location
Follow all normal jump-starting precautions as outlined in other AAA/CAA
publications and those provided by the manufacturer.
Ensure that all electrical accessories and the ignition switch are turned OFF and
the ignition key is removed from the ignition before connecting jumper cables or
a jumper box to the discharged vehicle

Other manuals for Lincoln 2016 MKT

Related product manuals