Note: This position helps to reduce wind
noise or rumbling which may happen with
the moonroof fully open. Press and release
the control again to fully open the moonroof.
Closing the Moonroof and Sunshades
Note: The sunshades only close after the
moonroof completely closes.
Pull and release the control. The moonroof
stops short of the fully closed position. Pull
the control again and hold to fully close the
moonroof.
Pull and release the control to close the
sunshades. The sunshades stop short of the
fully closed position. Pull the control again
and hold to fully close the sunshades.
Venting the Moonroof (If Equipped)
Press and release the TILT control to vent
the moonroof. Pull and hold the TILT control
to close the moonroof.
102
MKT (), enUSA, First Printing
Windows and Mirrors
To Next Page
Loading...
