Note: Replacing the battery does not erase
the programmed key from your vehicle. The
transmitter should operate normally.
A message appears in the information
display when the remote control battery is
low. See Information Messages (page 119).
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
1. Push the release button and pull the key
blade out.
2. Twist a thin coin under the tab hidden
behind the key blade head to remove
the battery cover.
3. Insert a suitable tool, for example a
screwdriver, in the position shown and
carefully remove the battery.
4. Install a new battery with the + facing
upward.
55
MKZ Hybrid (CC9) Hybrid Electric Vehicle (HEV), Canada/United States of America, enUSA, First Printing
Keys and Remote Controls
To Next Page
Loading...
