INSTALLING THE VEHICLE
IDENTIFICATION CARD
Install any devices that use radio frequency
identification, for example, toll readers or
vehicle identification cards, to the specified
area on the windshield.
Note: Follow the manufacturer’s installation
instructions.
Note: When installing the radio frequency
identification device, do not block objects
such as the rain sensor and the
auto-dimming sensor.
E291100
DimensionDimension DescriptionItem
No less than 1.6 in (40 mm).The top edge of the windshield to the top
edge of the identification card.
A
No more than 3.9 in (100 mm).The center of the windshield to the right edge
of the identification card.
B
489
Vehicle Identification
To Next Page
Loading...
