1. Memory Function
The memory function allows a one-touch recall of personalized memory
features, including the driver seat, power mirrors and steering column*. Use
the memory controls on the driver door to program and then recall memory
positions. To program a position, turn the vehicle on. Adjust the memory
features to your desired positions. Press and hold the desired preset button
until you hear a single tone. You can now use these controls to recall the set
memory positions. You can also program your memory seat to your remote
control. That way, when you unlock your door with the remote control, your
memory features automatically move into your saved positions. You can link
additional features to your memory preset by creating a personal profile. See
the Seats chapter in your Owner’s Manual for more details.
2. Power Front Head Restraint
Use the four-way controls on the door panel to adjust the height and angle of
the front head restraints.
3. Lumbar Support
Press this button to access the lumbar menu on the touchscreen.
4. Upper Seatback
Press forward or backward to adjust the upper seatback in the
corresponding direction.
5. Seat Recline
Press this button to move the entire seatback forward or backward.
6. Seat Adjust
Using these controls, you can adjust seat height and move the seat forward
and backward.
7. Seat Cushion Length Adjustment
Press the top of the control to adjust the left thigh-extender cushion and the
bottom of the control to adjust the right thigh-extender cushion.
Multi-Contour Front Seats with Active Motion Massage*
Using the touchscreen menu, you can switch the massage system on and off.
30-Way Seat Controls*
11
To Next Page
Loading...
