On all engines
3. Open the heater air bleed.
4. Add coolant to the degas bottle allowing the system to equalize until no more coolant can be added.
On 3.0L engines
5. Close the engine air bleed when coolant begins to escape.
On all engines
6. Replace the degas bottle cap.
On 3.9L engines
CAUTION: Care must be taken to ensure the accessory drive belt does not become contaminated with engine coolant.
7. Add as much coolant as possible to the engine fill. The heater air bleed will remain open.
8. Replace the engine fill cap.
On all engines
9.
The heater air bleed remains open.
Page 2 of 32001 Lincoln LS Workshop Manual
12/14/2010http://www.fordtechservice.dealerconnection.com/pubs/co...
To Next Page
Loading...
