Installing the Luggage Cover
The luggage cover cassette attaches to the
rear quarter trim panel.
1. Load the cassette into the rear quarter
trim from the top down.
2. Push the cassette down, the click
indicates the luggage cover is properly
installed.
3. Pull the cover straight back until it locks.
Removing the Luggage Cover
1. To release the cover, tap the center of
the board by the pull handle.
2. To release the cassette from the rear
quarter trim panel, slide the button
forward.
3. After sliding the button forward, lift the
cassette up.
Note: There are buttons on both sides of the
cassette.
301
2022 Nautilus (CD9) Canada/United States of America, enUSA, Edition date: 202108, First-Printing
Luggage Compartment
To Next Page
Loading...
