REVERSE WIPE
WHAT IS REVERSE WIPE
Reverse wipe turns on the rear window wiper
when you shift into reverse (R) and the
windshield wipers are on.
REVERSE WIPE SETTINGS
1. From the settings menu, press Vehicle.
2. Press Wipers.
3. Switch Rear wiper on or off.
CHECKING THE WIPER BLADES
Run the tip of your fingers over the edge of
the blade to check for roughness.
REPLACING THE FRONT WIPER
BLADES
1. Turn the vehicle off.
2. Manually rotate the wiper upward to the
proper position.
Note: The position should enable wiper arm
lift without contacting the hood and easy for
you to operate.
3. Lift the wiper arm and then press the
wiper blade locking button.
Note: Do not hold the wiper blade to lift the
wiper arm.
4. Remove the wiper blade.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
5. To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks
into place.
Your vehicle may be equipped with a heated
wiper park feature that allows the wipers to
operate in cold temperatures. See Switching
the Heated Wiper Park On and Off (page
143).
106
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Wipers and Washers
To Next Page
Loading...
