Loose, Noisy or Intermittently Working
Mirrors
If you manually fold the power folding
mirrors, they may not work properly even
after you reposition them. Reset the mirrors
if:
• They vibrate when you drive.
• They feel loose.
• They do not stay in the folded or
unfolded position.
• One of the mirrors is not in its normal
driving position.
• The mirrors are intermittently working.
To reset the power fold feature, use the
power folding mirror control to fold and
unfold the mirrors. You may hear a loud noise
as you reset the power folding mirrors. This
sound is normal. Operate the power folding
mirrors an additional 3 to 4 times to
synchronize the mirrors.
If the above process does not help you to fix
the mirror, perform the following steps.
1. Fold or retract both mirrors manually.
2. Using the power folding control switch,
operate the mirrors until you hear an
audible click.
3. Operate the power folding an additional
3 to 4 times to synchronize the mirrors.
Repeat this process as needed each time
you manually fold the mirrors.
AUTO-DIMMING EXTERIOR MIRROR
WHAT IS THE AUTO-DIMMING
EXTERIOR MIRROR
The driver exterior mirror dims when the
interior auto-dimming mirror turns on.
Memory Mirrors (If Equipped)
You can save and recall the mirror positions
through the memory function. See Memory
Function (page 169).
Heated Exterior Mirrors (If Equipped)
See Switching the Heated Mirrors On and
Off (page 143).
Signal Indicator Mirrors (If Equipped)
The forward-facing portion of the appropriate
mirror housing blinks when you switch on
the direction indicator.
Lincoln Welcome Mat (If Equipped)
Projection lights, on the bottom of the mirror
housings, project an image onto the ground
a short distance from the vehicle.
Blind Spot Monitor
See What Is Blind Spot Information System
(page 304).
360 Degree Camera (If Equipped)
See What Is the 360 Degree Camera (page
252).
127
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Exterior Mirrors
To Next Page
Loading...
