Lincoln NAUTILUS 2025 - Directing the Flow of Air

Note: The blue arrow decreases and the red
arrow increases the temperature. Pressing
the temperature value allows you to control
it using the slider.
E413046
Press the button to switch dual
mode on.
DIRECTING THE FLOW OF AIR
Electromechanical registers
Electromechanical registers allow airflow
direction to be controlled through the
touchscreen.
E406242
Directing the flow of air on driver and
passenger side:
E406615
Drag the airflow line to change the
airflow direction.
E406616
Press this button to direct the
airflow direction onto the body.
E406617
Press this button to direct the
airflow direction away from the
body.
E406618
Press this button to allow the
airflow to sweep.
E406619
Drag the airflow line down to close
the area or use the close button to
shut down the registers. Touching
the related area opens the register.
When in free adjustment mode, you can
change the direction from any of the air vents
by dragging the relevant register areas in
the touchscreen.
To cancel the airflow sweep function,
do one of the following:
• Touch/adjust the register manually.
• Select the different motion options.
• Press the close icon on the menu.
Note: Do not block the air vents when they
are moving. Once blocked, drag the airflow
direction and clear out the obstacle.
Note: Air flow sweep mode may not work,
when climate control is powered off/on, and
must be turned back on manually.
Note: When the Climate System is set to
AUTO mode, there may be no airflow
through the Electromechanical registers, but
the registers may continue to sweep. This is
normal.
See Climate Control Hints (page
145).
Note: Electromechanical registers may
continue to work for a certain time after the
vehicle is powered off. This is normal.
144
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Climate Control