All electrical circuits and accessories are
operational and the warning lamps and
indicators illuminate.
Note: Your vehicle has a battery saver
feature that shuts your vehicle off when it
detects a certain amount of battery drain, or
after approximately 30 minutes of inactivity
in accessory mode.
Note: The system may not function if the
passive key is close to metal objects or
electronic devices, for example keys or a
cell phone.
Note: You need a valid passive key inside
your vehicle to switch the ignition on and
start the engine.
STARTING THE ENGINE
STARTING A GASOLINE ENGINE
Before starting your vehicle, check the
following:
• Make sure that the parking brake is on.
• Make sure that the transmission is in park
(P).
1. Fully press the brake pedal.
Note: Do not touch the accelerator pedal.
2. Press the push button ignition switch.
Note: The engine may continue cranking for
up to 15 seconds or until it starts.
Note: The engine takes longer to start at
lower temperatures. It may crank for several
seconds when very cold.
STARTING A HYBRID ELECTRIC
VEHICLE SYSTEM
Before starting your vehicle, check the
following:
• Make sure the parking brake is on.
• Make sure the transmission is in park (P).
Note: Do not touch the accelerator pedal.
1. Fully press the brake pedal.
2. Press the push button ignition switch.
When you start your vehicle, a
green indicator appears in the
instrument cluster letting you know
that your vehicle is ready for driving. Since
your vehicle is equipped with a silent key
start, the engine may not start when your
vehicle starts.
When the engine starts for the first time on
your drive, the idle speed increases, this
helps warm up the engine. If the engine idle
speed does not decrease, have your vehicle
checked by an authorized dealer.
The system does not function if:
• The passive key frequencies are jammed.
• The key battery has no charge.
186
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Starting and Stopping the Engine
To Next Page
Loading...
