360 DEGREE CAMERA SETTINGS
SWITCHING THE 360 DEGREE
CAMERA ON AND OFF
Press the button on the center
console to bring up full screen
notifications.
Note: When the button is pressed, the
normal with 360 degree view is shown as
default and other front views are accessed
from the screen.
Note: The rear view camera activates when
you switch into reverse (R).
The following camera views can be changed
through the touchscreen:
• Normal view.
• Normal view with 360 degree.
• Split view.
When in park (P), neutral (N) or drive (D), only
the front images display when the button is
pressed.
Note: The 360 degree camera system turns
off when your vehicle is in motion at a low
speed, except when in reverse (R).
Object Detected Camera View
The object detected camera view
automatically activates the front 360 degree
view when the following conditions are met:
• Parking aid is active.
• An object is close to the front of the
vehicle.
• The vehicle is in drive (D) or neutral (N).
When the object distance indicator is green
or yellow, the front 360 degree view displays
and remains active for a few seconds before
closed.
When the object distance indicator is red,
the front 360 degree view displays and
remains continuously active.
Note: When a view is already displayed, the
object detected camera view does not
replace the current active view.
SWITCHING THE 360 DEGREE
CAMERA VIEW
You can press the button on the touch
screen to access the different camera views.
Normal + 360 view: Contains the
normal camera view next to a 360
degree camera view.
Normal view: Provides an image
of what is directly in front of your
vehicle.
Split view: Provides an extended
view of what is in front of your
vehicle.
Split view: Provides an extended
view of what is behind your
vehicle.
Normal view: Provides an image
of what is directly behind your
vehicle.
Zooms in on the image.
255
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
360 Degree Camera
To Next Page
Loading...
