The system resumes operation when you
release the accelerator pedal. The vehicle
speed decreases to the set speed, or a lower
speed if following a slower vehicle.
ADAPTIVE CRUISE CONTROL
INDICATORS
Illuminates when you switch
adaptive cruise control on. The
color of the indicator changes to
indicate the system status.
White indicates the system is on but inactive.
Blue indicates that you set the speed and
the system is active.
SWITCHING FROM ADAPTIVE
CRUISE CONTROL TO CRUISE
CONTROL
WARNING: Normal cruise control will
not brake when your vehicle is
approaching slower vehicles. Always be
aware of which mode you have selected
and apply the brakes when necessary.
1. From the settings menu, press Driver
Assistance.
2. Press Cruise Control.
3. Press Normal Cruise Control.
The cruise control indicator
replaces the adaptive cruise
control indicator if you select
normal cruise control. The gap setting does
not display, and the system does not respond
to lead vehicles. Automatic braking remains
active to maintain set speed. The system
remembers the last setting when you start
your vehicle.
LANE CENTERING
HOW DOES LANE CENTERING WORK
Adaptive cruise control with lane centering
uses the vehicle's front radar sensor and
front windshield camera sensor, together
with the steering sensor to operate.
Using these sensors, the system applies
continuous steering assistance towards
driving in the middle of the lane.
Note: The gap setting for adaptive cruise
control with lane centering, operates in the
same way as normal adaptive cruise control.
LANE CENTERING PRECAUTIONS
WARNING: Do not use the system
when towing a trailer or when the vehicle
is loaded to near or over maximum
payload. Failure to follow this instruction
could result in the loss of control of your
vehicle, personal injury or death.
266
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Adaptive Cruise Control
To Next Page
Loading...
