PREDICTIVE SPEED ASSIST
LIMITATIONS
WARNING: The system may not
always adjust vehicle speed in certain road
or weather conditions such as crossing
traffic, yield or stop signs, right of way,
traffic lights, speed bumps, rain, snow, fog.
You must always apply the brake or
accelerator pedal when necessary.
The road geometry and speed limit
information provided by the navigation map
data could be inaccurate or out of date.
The system may not detect and read speed
limit signs with conditional information, for
example, when a sign is flashing, during
specific time ranges, or when children are
present.
Note: The system does not set the vehicle
speed to speed limits shown with a
supplementary traffic sign.
Under certain conditions, the system may
not adjust the vehicle speed until after your
vehicle passes the speed limit.
Detection of road geometry operates only
where related information is available. Road
geometry information may not be available
in some areas.
SWITCHING PREDICTIVE SPEED
ASSIST MODE ON AND OFF
1. From the settings menu, press Driver
Assistance.
2. Press Cruise Control.
3. Press Adaptive Cruise Control.
4. Switch Predictive Speed Assist on or off.
ADJUSTING THE SET SPEED
TOLERANCE
1. From the settings menu, press Driver
Assistance.
2. Press Cruise Control.
3. Press Adaptive Cruise Control.
4. Switch Predictive Speed Assist on.
5. Press Tolerance.
6. Adjust the slider to set the tolerance.
Note: You can set tolerance for vehicle
speed adjustment based on speed sign
recognition only.
PREDICTIVE SPEED ASSIST ALERTS
If the speed sign recognition system detects
a speed limit below the minimum adaptive
cruise control set speed, a tone sounds and
the system returns to standby mode.
PREDICTIVE SPEED ASSIST
INDICATORS
A blue marker around the speed sign and a
blue arrow next to the set speed indicates
that the system is active.
272
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Adaptive Cruise Control
To Next Page
Loading...
