BLUECRUISE AUTOMATIC
CANCELLATION
When an external condition cancels
BlueCruise, for example, no lane markings
available, a message appears in the
instrument cluster, and an audible warning
sounds.
If your vehicle starts to slow down,
you must take control by returning
your attention to the road and your
hands to the steering wheel. Then press and
release the button to reactivate BlueCruise.
System cancellation can also occur if:
• The lane becomes too narrow.
• The system cannot detect valid lane
markings.
• Lane markings cross.
• Your eyes are not on the road or your
hands are not on the steering wheel.
If you have your hands on the steering wheel
and your eyes are on the road when the
feature is active and a cancellation occurs,
the system displays a canceled graphic in
the instrument cluster and sounds an audible
warning.
If you are not paying attention to the road or
your hands are not on the steering wheel
and a cancellation occurs, the system
displays a message in the instrument cluster,
and sounds an audible warning until you
resume control.
If you do not resume control in time,
BlueCruise quickly activates and releases
the brakes, activates the hazard lights, and
slows your vehicle to a stop within the lane
of travel while maintaining steering control.
If your vehicle slows down or stops and you
resume control, a message appears to
prompt you to press the accelerator pedal
to allow the system to resume.
Note: If the system detects repeated
inactivity, it disables until the next time you
start your vehicle.
BLUECRUISE INDICATORS
When on, the color of the indicator
changes to indicate the status.
Gray indicates BlueCruise is on but inactive.
Green indicates BlueCruise is active and
applying continuous steering support.
Blue indicates BlueCruise is active and
hands-free driving mode is available.
Hands-On Driving Support Available
280
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Lincoln BlueCruise
To Next Page
Loading...
