Diagram 1: Vehicle A uses its left turn signal
preparing to change from the right lane to
the middle lane. Vehicle B is already in the
middle lane and just entered Vehicle A's
blind spot causing the blind spot information
system alert indicator to flash on the exterior
mirror.
Diagram 2: The driver of Vehicle A begins
to steer into the center lane not aware of
Vehicle B.
Diagram 3: Blind spot assist counter steers
to help alert the driver of Vehicle A to direct
their vehicle back into the right lane to help
avoid a possible collision with Vehicle B.
The lane keeping aid warning lamp or yellow
lane marking in your instrument cluster
display indicate blind spot assist activation.
In addition, the blind spot information system
alert indicator flashes on the exterior mirror
on the same side as the detection. See Blind
Spot Information System (page 304).
Blind Spot Assist Information Messages
ActionMessage
Displays if you attach a trailer to your vehicle with the blind spot information system switched off
or you have not configured the trailer.
Blind Spot Assist Not Available Trailer
Attached
Displays if your blind spot information system sensors are blocked.Blind Spot Assist Not Available Side
Sensor Blocked
The system has detected a fault that requires service. Have your vehicle checked as soon as
possible.
Blind Spot Assist System fault
Lost communication with the trailer module. Blind spot assist is disabled until the failure is fixed.Trailer Brake Module Fault
Lost communication with the trailer module. Blind spot assist is disabled until the failure is fixed.Trailer Lighting Module Fault See Manual
Front camera fault. Blind spot assist is disabled until the failure is fixed.Front Camera Fault Service Required
300
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Lane Keeping System
To Next Page
Loading...
