EVASIVE STEERING ASSIST
LIMITATIONS
Evasive steering assist only activates when
all the following occur:
• Automatic emergency braking and
evasive steering assist are on.
• The system detects a road user ahead
and starts to apply the brakes.
• You significantly turn the steering wheel
to steer around a road user.
Note: Evasive steering assist does not
automatically steer around a road user. If
you do not turn the steering wheel, evasive
steering assist does not activate.
SWITCHING EVASIVE STEERING
ASSIST ON AND OFF
1. From the settings menu, press Driver
Assistance.
2. Press Pre-Collision Assist.
3. Press Evasive Steering Assist.
4. Switch the feature on or off.
Note: If you switch automatic emergency
braking off, evasive steering assist turns off.
Note: Automatic emergency braking and
evasive steering assist turn on every time
you start your vehicle.
PRE-COLLISION ASSIST –
TROUBLESHOOTING
PRE-COLLISION ASSIST – WARNING
LAMPS
A telltale illuminates in the
instrument cluster display to
indicate if the system is disabled,
unavailable, or temporarily degraded due to
external environmental conditions.
Note: If the telltale illuminates without a
corresponding information message, make
sure the setting for automatic emergency
braking is switched on. See Switching
Automatic Emergency Braking On and Off
(page 322). No action is needed unless an
information message appears. See
Pre-Collision Assist Precautions (page 318).
323
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Pre-Collision Assist
To Next Page
Loading...
