TRANSPORTING THE VEHICLE
If you need to tow your vehicle, contact a
professional towing service or your roadside
assistance service provider.
Your manufacturer produces a towing
manual for all authorized tow truck operators.
Have your tow truck operator refer to this
manual for proper hook-up and towing
procedures.
We recommend the use of a wheel lift and
dollies or flatbed equipment to tow your
vehicle. Vehicle damage could occur if towed
incorrectly, or by any other means.
Front-wheel and rear-wheel drive vehicles
must have their designated drive wheels off
the ground regardless of towing direction.
Use tow dollies to prevent damage to the
transmission.
All-wheel or four-wheel drive vehicles require
that all wheels be off the ground using a
wheel lift and dollies or flatbed equipment.
This prevents damage to the transmission
and drive system.
Note: You need to switch on the ignition to
unlock the steering.
Note: Make sure you check the steering
column before towing. It could lock if the
battery is dead.
FAIL-SAFE COOLING
WHAT IS FAIL-SAFE COOLING
Fail-safe cooling allows you to temporarily
drive your vehicle before any incremental
component damage occurs due to
overheating.
The fail-safe distance depends on outside
temperature, vehicle load and terrain.
HOW DOES FAIL-SAFE COOLING
WORK
If the engine reaches a preset
over-temperature condition, the engine
automatically switches to alternating cylinder
operation. Each disabled cylinder acts as an
air pump and cools the engine.
363
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Crash and Breakdown Information
To Next Page
Loading...
