EasyManua.ls Logo

Lincoln NAUTILUS 2025 - Fastening and Unfastening the Seatbelts

Lincoln NAUTILUS 2025
606 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The seatbelt system consists of:
Lap and shoulder seatbelts.
Shoulder seatbelt with automatic locking
mode, except driver seatbelt.
Height adjuster at the front outermost
seating positions.
Seatbelt pretensioners at the front
outermost and second row outermost
seating positions.
Belt tension sensor at the front outermost
passenger seating position.
E71880
Seatbelt warning light and chime.
E67017
Crash sensors and monitoring system
with readiness indicator.
The seatbelt pretensioners are designed to
tighten the seatbelts when activated. In
frontal and near-frontal crashes, the seatbelt
pretensioners may be activated alone or, if
the crash is of sufficient severity, together
with the front airbags. The pretensioners may
also activate when a Safety Canopy airbag
deploys.
FASTENING AND UNFASTENING
THE SEATBELTS
WARNING: Make sure that the
seatbelts are securely stowed away when
not in use and not outside your vehicle
when closing the doors.
WARNING: Accessory seat covers
not released by Ford Motor Company
could prevent the seatbelt from retracting
correctly. This could cause the seatbelt to
become slack which could increase the
risk of injuries in a crash.
All seatbelts in your vehicle are a three-point
combination lap and shoulder seatbelt.
E338014
B
A
Seatbelt tongue.A
Seatbelt buckle.B
1. Pull the seatbelt out steadily.
Note: It may lock if you pull it sharply or if
the vehicle is on a slope.
2. Insert the tongue into the buckle.
49
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Seatbelts

Table of Contents

Related product manuals