3. For the seating position you are switching
off, fasten then unfasten the seatbelt four
times at a moderate speed, ending in the
unfastened state. After Step 3, the
seatbelt warning light switches on.
4. When the seatbelt warning light is on,
fasten then unfasten the seatbelt. After
Step 4, the seatbelt warning light flashes
for confirmation.
This switches the seatbelt reminder audible
warning off for that seating position if it is
currently on.
This switches the seatbelt reminder audible
warning on for that seating position if it is
currently off.
CHECKING SEATBELT STATUS (If Equipped)
To view the seatbelt status, use the
instrument cluster display controls on the
steering wheel.
1. Press the menu button on the steering
wheel to enter the instrument cluster
display main menu.
2. Select Status Information.
3. Select Seatbelts.
Seatbelt fastened.A
Seatbelt not fastened.B
Fault.C
Seatbelt recently unfastened.D
CHECKING THE SEATBELTS
Check the seatbelts and child restraints
periodically to make sure they work properly
and are not damaged. Make sure there are
no nicks, tears or cuts. Replace if necessary.
Check the following seatbelt assemblies after
a crash.
• Retractors.
• Buckles.
• Front seatbelt buckle assemblies.
• Shoulder belt height adjusters.
• Shoulder belt guide on seat backrest.
• Child restraint LATCH and tether anchors.
• Attaching hardware.
Read the child restraint manufacturer's
instructions for additional inspection and
maintenance information specific to the child
restraint.
54
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Seatbelts