WHAT IS THE KEYLESS ENTRY
KEYPAD
The keyless entry keypad allows you to lock
and unlock your vehicle using the keypad
on the window trim.
KEYLESS ENTRY KEYPAD
LIMITATIONS
The system may not function if:
• The vehicle battery has no charge.
LOCATING THE KEYLESS ENTRY
KEYPAD
The keypad is near the driver window and
illuminates when you touch it.
KEYLESS ENTRY KEYPAD MASTER
ACCESS CODE
What is the Master Access Code
The master access code is a factory-set entry
code. You can operate the keypad with the
master access code at any time. The master
access code can be displayed in the
instrument cluster display.
Displaying the Master Access Code in
the Instrument Cluster Display
Read and understand the following before
you begin the process.
• You must have two keys inside your
vehicle.
• Make sure that you close all the doors
and that they remain closed throughout
the procedure.
• Do not place the device on the wireless
accessory charging area during the
procedure.
Note: Perform all steps within 30 seconds
of starting the sequence. If you perform any
of the steps out of sequence, stop and wait
for at least one minute before starting again.
1. Turn the vehicle off.
2. Place the first key into the backup slot.
See Accessing the Passive Key Backup
Position (page 190).
3. Turn on the vehicle, without pressing the
brake pedal, and wait for a few seconds.
4. Turn off the vehicle and replace the first
key with the second key.
85
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Keyless Entry Keypad