Lindab Airy - User Manual

© 2022.09 Lindab Ventilation A/S. Kaikenlainen toisintaminen ilman kirjallista lupaa on kielletty. on Lindab Ab:n rekisteröity tavaramerkki.
Lindabin tuotteet, järjestelmät sekä tuotteiden ja tuoteryhmien nimet on suojattu immateriaalioikeuksilla.
lindab | laadukasta sisäilmaa
Asennusohje
LindabAIRY
Tulo- ja poistoilmaventtiili

Summary

Valve Installation Procedures

Installing the Valve Body

Mount the valve body into the frame using flexible spring wings for sheet metal fittings.

Wall and Ceiling Installation

Ensure secure mounting for wall/ceiling installation, allowing 360-degree front plate rotation.

Front Plate and Balancing

Front Plate Installation

Attach the front plate to the valve cone by snapping the springs into the cone.

Air Balancing Preparation

Remove the front plate and loosen the wing nut to allow adjustment of the cone.

Airflow Measurement Methods

Using Flow Hood

Measure airflow with a flow hood, adjusting the front plate to achieve desired air delivery.

Using Pitot Static Tube

Measure airflow using a pitot static tube at multiple points in the duct for precise adjustment.

Completion and Maintenance

Final Installation Steps

Re-mount the front plate after any necessary adjustments are completed.

Valve Maintenance

Clean the valve with mild detergent or damp cloth; replace insulation if needed.

Lindab Airy Specifications

General

Brand	Lindab
Model	Airy
Category	Control Unit
Language	English