User Manual English
Introduction
Thank you for purchasing the 2 or 4 Port HDMI 10.2G Splitter. This product has been designed to provide
trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 2 & 4 Port HDMI 10.2G splitter is a low-cost, compact solution for distributing high quality 4K
Ultra HD across two or four displays from a single source device.
Package Contents
▪ 2 / 4 Port HDMI 10.2G Splitter
▪ 5VDC 1A Multi-Country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm
▪ Lindy Manual
Features
▪ Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit
▪ Supports HDMI digital audio pass-through up to 7.1CH
▪ CEC Pas-through on HDMI Out 1
▪ EDID Management Dipswitch
Specification
▪ Interface Standard: HDMI 1.4 10.2G
▪ Maximum Resolution: 3840x2160@60Hz 4:2:0 8bit, 3840x2160@30Hz 4:4:4 8bit
▪ HDCP Support: 1.4
▪ Operating Temperature: 0°C - 40°C (32°F - 104°F)
▪ Storage Temperature: -20°C - 60°C (-4°F - 140°F)
▪ Humidity: 20 ~ 90% RH (Non-condensing)
▪ Black, metal housing
Installation & Operation
Please ensure all devices are switched off before connecting any source devices or displays. Connect a
source device to the Input port of the HDMI splitter, then connect displays to the HDMI output ports.
Once all connections are made please switch on the devices in the following order: Displays, HDMI
Splitter, Source Device.
EDID Management
Please Note: The splitter must be restarted when any EDID changes are made.
38158 - Copy/Auto
▪ Auto – Scans both outputs and chooses the highest EDID settings compatible with both screens.
▪ Copy – Copy the EDID of HDMI Out 1.
38159
To Next Page
Loading...
