Need help?Do you have a question about the Line 6 LowDown HD400 and is the answer not in the manual?
General| Power Output | 400 Watts |
|---|---|
| Amplifier Type | Solid State |
| Speaker Configuration | 1x15" |
| Effects | Built-in effects including chorus, reverb, and delay |
| Inputs | 1/4" Input, XLR Input |
| Outputs | 1/4" Headphone Out |
| Number of Channels | 4 |
| EQ | 4-band EQ (bass, low-mid, high-mid, treble) |
| Footswitch I/O | 1/4" Footswitch Input |
| Amp Models | Multiple amp models including vintage and modern bass tones |
Covers general safety guidelines for operating the apparatus safely.
Explains warnings and cautions related to electric shock, fire, and moisture.
Details Passive and Active inputs for connecting bass guitars.
Explains selection of amp models and adjustment of drive for tone.
Describes Bass, Mid, Treble controls and Channel Volume for tone shaping.
Explains Opto Comp for dynamics and Smart FX for modulation effects.
Covers Master Volume for overall amp level and Deep for tone shaping.
Explains saving presets, manual mode, and the built-in tuner.
Details XLR Direct Out, Mute Horn, CD/MP3, Foot Control, Headphone, and Power.
Describes Preamp Out, Extension Speaker Output, and Speaker Outs for connecting external gear.
Explains the use of high-current twist-lock Speakon connections for speaker cabinets.
Offers guidance on positioning the amp for optimal sound in different environments.
Advises on balancing tone for stage monitoring and audience experience.
Explains how to adjust tone controls for different amp models and provides helpful hints.
Details the function of Drive and Tone Controls for shaping sound.
Describes the Opto Comp compressor control and its LED indicator.
Details the characteristics of Clean, R&B, Rock, and Brit amp models.
Describes the Grind and Synth amp models, including their inspirations.
Explains Drive, Cutoff, Resonance, Envelope, and Attack/Decay for Synth.
Describes the available waveforms for the Opto Comp and their sonic characteristics.
Details the Envelope Filter effect, its inspiration, and operation.
Explains the Octaver and Chorus effects, their models, and sonic qualities.
Guides users on saving custom presets and recalling factory presets.
Explains manual mode and how to use the built-in tuner and its indicators.
Details the XLR Direct Out for recording and Mute Horn for treble control.
Explains how to connect and use external audio sources like CD/MP3 players.
Covers headphone usage and procedure for factory resetting presets.
Introduces Line 6 FBV foot controllers for extended amp control.
Explains the functions of the FBV2 two-button foot switch.
Details channel selection, pedal functions (Volume/Wah), and indicator lights.
Guides on using the FBV Express integrated tuner function.
Illustrates the layout and labeling of the FBV Shortboard controls.
Explains how to navigate channels and banks on the FBV Shortboard.
Describes how to control effects (Smart FX, Comp, Deep) using stomp-like buttons.
Details the Tap/Tuner function and the pedal's control over Wah/Volume.
Explains connecting an external expression pedal and its function.
Advises browsing presets to identify ones to replace with custom sounds.
Guides on naming presets and saving them to channel memories.
To Next Page