1. MODEL SELECTOR - This is where you pick the model you want to use; it comes up pre-set to a great sound.
2. SPEED - Typically sets the speed of your modulation. Check the modulation model descriptions for more details.
3. DEPTH - Typically adjusts the intensity of the modulation effect. Check the modulation model descriptions for more details.
4. TWEAK - This is a special control unique to individual modulation models. Check the modulation model descriptions for more details.
5 TWEEZ - This is the other special control unique to individual modulation models. Check the modulation model descriptions for more details.
6. MIX - This knob is always used to set the mix between the dry/direct/unprocessed signal and the processed signal. Turn counterclockwise for more dry signal.
7. STOMP SWITCHES - These switches choose one of the 4 memories. Step on a switch to get the sound that was stored there. To change what’s in a memory, hold one
of these switches for 3 seconds: that will store whatever sound you are currently hearing, so you can recall it by pressing that switch.
To Next Page
Loading...
Need help?
General