Line 6 POD HD500 User Manual

Overview
1•2
At the bottom of the Signal Flow View screen, you’ll see up to four parameters that are
accessed using the Multi-function knobs 1-4.
Accessing parameters with the Multi-select Knobs
These parameters are specic to the currently selected Block and allow you to choose new
Models & edit parameters. Or, you can dive deeper in the Edit Mode and access additional
settings in other screens, as covered in the following chapters.
Performance View
The Performance View screen displays the FX and/or Presets that are currently assigned
to your POD HD500 footswitches. Footswitches FS5 - FS8 can be congured to either
toggle FX On/Off, or to select Preset channels (see “Page 1, Setup:Utilities Options” on
page 2•2).
FX assignment for FS1-FS8 ABCD assignment for FS5-FS8
These FX assignments for FS1 - FS8 can be edited for each Preset (see “FX & Amp Block
Footswitch Assignment” on page 3•10). When the Looper is active, the Performance View
screen displays a set of Looper functions (see “Looper Mode” on page 8•1).

Line 6 POD HD500 Specifications

General

Type	Multi-Effects Processor
Power Source	AC adapter (included)
Computer Connectivity	USB
Presets	512 (256 User, 256 Factory)
Effects	Over 100 effects
Looper	Yes, 48 seconds
Inputs	1 x 1/4" Guitar Input, 1 x XLR Mic Input, 1 x 1/4" Aux Input
Outputs	1 x 1/4" Headphone Output, 1 x XLR Main Output
MIDI	In/Out
Display	LCD
Expression Pedal	Yes, built-in
Weight	5.4 kg
Footswitches	12 Footswitches