Line 6 SPIDER V 30 User Manual

Bypass Smart FX
1. Press the FX BUTTON to select the FX Layer.
2. Turn the ROTARY KNOB to highlight which eect you wish to
bypass.
3. Press the ROTARY KNOB to bypass the highlighted eect.
4. Press the HOME BUTTON to exit.
Using the Quick Looper*
To enter Quick Looper Mode, press the QUICK LOOP BUTTON.
To record a loop:
1. To begin recording, press the QUICK LOOP BUTTON to set the
loop start.
2. To start playback, press the QUICK LOOP BUTTON to set the
loop end.
3. Double-Press the QUICK LOOP BUTTON to stop playback.
To overdub:
1. When the loop is in playback press the QUICK LOOP BUTTON to
set the overdub start point.
2. Press the QUICK LOOP BUTTON to end overdub and start
playback.
3. Double-Press the QUICK LOOP BUTTON to stop playback.
To stop playback, double-press the QUICK LOOP BUTTON.
To erase the loop, press and hold the QUICK LOOP BUTTON to erase
the loop content.
Play Drum Loops
1. Press the PLAY/PAUSE BUTTON to enter the Playback Screen.
2. Turn the ROTARY KNOB to scroll to the icon on the left and press
to change it to the Musical Notes icon.
3. Use the ROTARY KNOB to highlight the Drum Loop parameters to
select which groove will be played, and control its volume.
4. Press the PLAY/PAUSE BUTTON to start and stop the Drum
Loops.
Start the Metronome
1. Press the PLAY/PAUSE BUTTON to enter the Playback Screen.
2. Turn the ROTARY KNOB to scroll to the icon on the left and press
the knob to change it to the Metronome icon.
3. Press the PLAY/PAUSE BUTTON to start and stop the metronome.
4. Press the HOME BUTTON to exit.
Play Audition Samples
1. Press on the PLAY/PAUSE BUTTON to enter the Playback Screen.
2. Turn the ROTARY KNOB to scroll to the icon on the left of the
screen. Press the ROTARY KNOB to change it to the Guitar/Tape
icon.
3. Use the ROTARY KNOB to highlight the "Demo Ri" parameter to
select the ri.
4. Press the PLAY/PAUSE BUTTON to start or stop the demo.
5. While the demo ri is playing, you may change presets and make
any changes to amp models and eects.
6. Press the HOME BUTTON to exit.
*Available on select models. Please see the comparison chart to see
which features are on each model of Spider V.

Line 6 SPIDER V 30 Specifications

General

Power	30W
Speaker	1 x 8" Custom Speaker
Presets	128
Built-in Tuner	Yes
USB Audio Interface	Yes
Channels	1
Connectivity	USB
Weight	17 lbs
Amplifier Type	Modeling
Inputs	1 x 1/4" Instrument, 1 x 1/8" Aux
Outputs	1/4" Headphone