DO-321A
The appliance works but
does not cool off/down in
COOLING mode
A window or door is open
There is a heater or heating element switched on
The air lter is dirty
Air or inlet/outlet is blocked
The selected temperature is too high
Water is leaking from the
appliance when you move it
Empty the water collection container
Place the appliance on a at horizontal surface
Code E4 is visible on the
display
Empty the collection container
If this is a regular occurrence, contact
a recognised tter/repair service point
Code E2 The room temperature sensor
is broken and needs to be replaced
Code E3 The evaporation sensor is broken and needs to be
replaced
33
To Next Page
Loading...
