▪ Connect the mains power adapter to a
suitable wall outlet. Plug the power cable
into the DC power socket of the Wi-Fi
camera and turn on.
▪ If installed in a wall or ceiling that is
further away from a wall outlet. You can
use an extension cord to extend the reach
for power, or you can get the cable
extension (sold separately) from our store.
It is the LZ3-EXT and it provides an
additional 15 feet of cable.
▪ Once the device is powered up; the LED
status indicator should display green
indicating start up.
▪ Download the app "X10 Linked" from
Google Play or the Apple App store. Open
the app once installed.
App Name: NetSee
Setup:
To Next Page
Loading...