Operations
Charging
Connect the air pump to a USB power source using the
included USB-C charging cable. It is recommended to use a
5V / 2A adapter to charge the pump.
Charging Indicator
Green light: 60% to 100% charged
Yellow light: 30% to 60% charged
Red light: 0% to 30% charged
Power On
Pull out the air hose and the pump will turn on
automatically.
Power Off
Completely push the air hose back into its receptacle to
turn off pump.
The pump will turn off automatically after 3 minutes of
inactivity or when battery is low.
To Next Page
Loading...