Start Inflation
Short press the Power button to start inflation. The
Measured Pressure portion of the display will show the
current air pressure as it changes. The air pump will
generate noise and heat during inflation. Avoid prolonged
contact with hose and hose joints with your hand.
Stop Inflation
When measured pressure reaches the preset pressure, the
pump will stop inflation automatically.
To stop inflation prematurely, press the Power button
during inflation.
LED Lighting
Press and hold the U button to turn LED flashlight on or off.
Hose Storage
The hose can be stored within the air pump in the hose
receptacle. Do not touch the hose after prolonged working
time until after it has cooled down.
To Next Page
Loading...