Linksys SPA 2102 ATA - Connecting the SPA 2102 without a Router

INSTALLATION GUIDE
Linksys SPA 2102 ATA
3
3. If no phone number has been selected, you can select a phone number for the extension. Then click Continue.
Installing your Linksys SPA 2102 ATA
Now that your extensions are congured, you can install and activate your device(s).
Follow the diagram below to connect your device using the ports on the back panel.
You will require either an analog phone or a fax machine with an analog phone to activate your device with 8x8 service using the
Phone 1 port.
PHONE 1 PHONE 2
ETHERNET INTERNET
DC 5V
Power
Fax Machine Computer or
Laptop
Internet Connection
(Router or
Broadband Modem)
Power AdapterAnalog Phone
or Fax Machine
• Use the PHONE 1 and PHONE 2 ports to connect an analog phone (or fax machine) with an RJ-11 telephone cable.
• The ETHERNET port connects to an individual network device, such as a PC or a Laptop.
• The INTERNET port connects to your router or if you have no router, direct to your cable or DSL Broadband Modem.
Note: If you connect directly to a broadband modem, you will rst need to congure your Linksys ATA to act as a router. Please
see the instructions in the Using your Linksys ATA as a Router section.
• The Power port is where you connect your AC power adapter.