Linksys SPA 2102 ATA

Basic Setup
Connecting the Telerain Linksys SPA 2102 with a router
The SPA 2102 will be placed right after your DSL or Cable Modem before the router.
1. Connect the Internet port of the SPA 2102 to your network Cable or DSL Modem.
2. Connect the Ethernet port of the SPA 2102 to your network Router.
3. Connect your telephone to the PHONE 1 port, or to PHONE 2 if this is your second line on the device.
4. Connect the power & wait 10 minutes.