The lights on the adapter will blink for about five minutes while the adapter talks our system to get set up
when you first plug it in. Once the lights have stopped flashing you should get a dial tone when you pick up
the phone and you can use it just like any normal phone.
Choppy Sound Solutions
Experiencing choppy sounds on the SPA 2102 indicates that you do not have enough upstream bandwidth to
support your VoIP conversations. We require at least 80kbps in each direction to hold a stable conversation.
If you only have, for example, 128kbps upstream and also have a game player, FTP session or some other
function going on in your home while trying to have a phone conversation you could end up with your ATA
not being able to get the bandwidth it needs to support the call. If connected just after the DSL or Cable
modem the ATA will always attempt to give priority to voice.
To Next Page
Loading...