Linksys WAP300N - Selecting the Device Operation Mode

WAP300N supports four operation modes:
• Access Point (AP) mode
• Wireless Media Connector (WMC) mode
• Wireless Range Extender (WRE) mode
• Wireless Bridge (WB) mode
Select the desired operation mode and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
For information about each of these operation modes, please refer to Overview on page XXX.
Wireless
The screens available under the tab Wireless depend on the operation mode that you have selected.
Operation
Mode
Basic Wireless
Settings
Wireless
Security
Wireless
Network Site
Wireless MAC
Filter
QoS