Linksys WAP300N - Accessing the Browser-Based Utility; Navigating to the Utility Interface; Login Credentials for Utility Access

How to access the browser-based utility
Use a web browser to access the browser-based utility for advanced configuration of this device.
Launch your web browser, and enter WAP300N’s IP address* (the default setting is 10.100.1.1) in the
Address field. Press Enter.
A password request screen appears (non-Windows 7 users will see a similar screen.) Leave the User
name field blank. Enter the password you have created. If you did not create a new password, use the
default password admin. (You can set a new password from the Administration > Management screen.)
Click OK to continue.
* NOTE: