Linksys WMP54G Quick Installation

F. The Setup Wizard will ask
you to review your settings
before it starts to copy files.
Click Next if you are satis-
fied with your settings, or
click Back to change any
settings.
G.After the files have been
successfully copied, you
will see Figure G. Click the
Exit button.
Proceed to Step 2.
Package Contents
• Wireless-G PCI Adapter
• External Antenna
• Setup Wizard CD-ROM with User
Guide
• Quick Installation and Registration
Card
Continued on back
This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation,
configuration, and further setup options, please consult the User Guide.
Instant Wireless
®
Series
WWiirreelleessss--GG PPCCII AAddaapptteerr
A. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and the Welcome screen should appear. If it
does not, click Start and choose Run. In the field that appears, enter
D:\setup.exe (if “D” is the letter of your CD-ROM drive).
B. Click the Install button.
C. After reading the License
Agreement, click Next if you
agree, or Cancel to end the
installation.
Software Installation and Configuration
for Windows 98SE, Me, and 2000
B
Attention Windows XP users: Go directly to Step 2.
D. The Setup Wizard will ask you to choose a wireless mode. Click the
Infrastructure Mode radio button if you want your wireless computers to
network with computers on your wired network using a wireless access
point. Click the Ad-Hoc Mode radio button if you want multiple wireless
computers to network directly with each other.
In the SSID field, enter the
SSID of your wireless net-
work. The SSID must be
identical for all devices in the
network. The default setting
is linksys (all lowercase). For
added security, Linksys rec-
ommends that you change the
default SSID to a unique
name.
Click Next to continue or Back to change any of your settings.
E. If you chose Infrastructure Mode, go to Step F now. If you chose Ad-Hoc
Mode, select a Channel from the list provided. All computers on your
wireless network must use the same channel in order to communicate with
each other. If you are unsure
about which channel to use,
select the default channel
(Channel 6). Then, select the
Network Mode: Mixed
Mode, which is for both
Wireless-G and Wireless-B,
or G-Only Mode, if there
will be no Wireless-B users.
Click Next to go to Step F or
Back to change any settings.
D
E
Installation of the WMP54G is different for different versions of
Windows.
• For Windows 98SE, Me, and 2000, go to Step 1 and then Step 2.
• For Windows XP, go to Step 2 and then Step 3.
C
F
G
WMP54G

Linksys WMP54G Specifications

General

Bandwidth	2.4 GHz
Data link protocols	IEEE 802.11b, IEEE 802.11g
Security algorithms	WEP, WPA
Maximum data transfer rate	54 Mbit/s
Minimum processor	Intel Pentium - 200 MHz
Compatible operating systems	Microsoft Windows 98 Second Edition / Windows ME, Microsoft Windows 2000 / XP
Internal memory	64 MB
Dimensions (WxDxH)	160 x 21 x 210 mm
Compliance industry standards	IEEE 802.11g, 802.11b, PCI 2.2, 2.3
Non-operating relative humidity (non-condensing)	0 - 95 %
Connectivity technology	Wireless
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 65 °C
Antenna type	5 dBi
Certification	FCC, CE, Wi-Fi, CCX 2.0

Weight and Dimensions

Depth	21 mm
Width	160 mm
Height	210 mm
Weight	90 g