Linksys WRT54G3G-ST - Using the Setup Wizard; Figure 5-1: Setup Wizards Welcome - Start Wizard Screen

18
Chapter 5: Setting up the Wireless-G Router for Mobile Broadband Service
Using the Setup Wizard
Wireless-G Router for Mobile Broadband
Using the Setup Wizard
1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\SetupWizard.exe (if “D” is the letter of your CD-ROM drive).
2. On the Welcome screen, click the Click Here to Start button if this is the first time you are running the Setup
Wizard. These are your other choices:
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
Figure 5-1: Setup Wizard’s Welcome - Start
Wizard Screen