Linksys WRT54G3G-ST - Figure 5-2: Select Service Screen; Figure 5-3: Insert Mobile Broadband Data Card Screen

19
Chapter 5: Setting up the Wireless-G Router for Mobile Broadband Service
Using the Setup Wizard
Wireless-G Router for Mobile Broadband
3. Click the Mobile Broadband Only radio button to configure the Router for mobile broadband service.
4. Make sure the Router is powered off. Insert your mobile broadband data card into the Router’s Data Card Slot
on the top panel of the Router. Then click the Next button.
Figure 5-2: Select Service Screen
Figure 5-3: Insert Mobile Broadband Data Card Screen
NOTE: If you click the Broadband WAN Only radio button to configure the Router for broadband
WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN
Service Only.” If you click the Broadband WAN and Mobile Broadband radio button to
configure the Router for broadband WAN and mobile broadband service, go to “Chapter 7:
Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Service.”