41
Chapter 7: Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Ser-
vice
Wireless-G Router for Mobile Broadband
3. Click the Broadband WAN and Mobile Broadband radio button to configure the Router for both broadband
WAN and mobile broadband service.
4. Make sure the Router is powered off. Insert your mobile broadband data card into the Router’s Data Card Slot
on the top panel of the Router. Then click the Next button.
Figure 7-2: Select Service Screen
Figure 7-3: Insert Broadband Mobile Data Card Screen
NOTE: If you click the Mobile Broadband Only radio button to configure the Router for mobile
broadband service only, go to “Chapter 5: Setting up the Wireless-G Router for Mobile
Broadband Service.”If you click the Broadband WAN Only radio button to configure the Router
for broadband WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for
Broadband WAN Service Only.”
To Next Page
Loading...
