82
Chapter 8: Configuring the Wireless-G Router for Mobile Broadband
The Status Tab - Router
Wireless-G Router for Mobile Broadband
The Status Tab - Router
The Router screen on the Status Tab displays the Router’s current status.
Router Information
Firmware Version. This is the Router’s current firmware.
Current Time. This shows the time, as you set on the Setup Tab.
MAC Address. This is the Router’s MAC Address, as seen by your ISP.
Router Name. This is the specific name for the Router, which you set on the Setup Tab.
Host Name. If required by your ISP, this would have been entered on the Setup Tab.
Domain Name. If required by your ISP, this would have been entered on the Setup Tab.
Internet
Configuration Type. Displayed here is the information required by your ISP for connection to the Internet. This
information was entered on the Setup Tab.
Click the Refresh button to view the latest status information.
Figure 8-49: Status Tab - Router
To Next Page
Loading...
