Wireless-G Broadband Router with 2 Phone Ports
54
Chapter 5: Configuring the Router
The Voice Tab - Info
System Status
Current Time. Displayed here is the current date and time of the Router.
Elapsed Time. Displayed here is the amount of time elapsed since the last reboot of the Router.
RTP Packets Sent. Displayed here is the number of RTP packets sent by the Router.
RTP Bytes Sent. Displayed here is the number of RTP bytes sent by the Router.
RTP Packets Recv. Displayed here is the number of RTP packets received by the Router.
RTP Bytes Recv. Displayed here is the number of RTP bytes received by the Router.
SIP Messages Sent. Displayed here is the number of SIP messages sent by the Router.
SIP Bytes Sent. Displayed here is the number of SIP bytes sent by the Router.
SIP Messages Recv. Displayed here is the number of SIP messages received by the Router.
SIP Bytes Recv. Displayed here is the number of SIP bytes received by the Router.
External IP. Displayed here is the external IP address used for NAT mapping.
Line 1/2 Status
Lines 1 and 2 have the same status information available.
Hook State. Displayed here is the status of the Internet phone line’s readiness. On indicates that it is ready for
use, while Off indicates that it is in use.
To Next Page
Loading...
