Linksys WUSB600N (EU) - Wi-Fi Protected Setup Connection Steps; Advanced Network Setup Guide

Chapter 3
Advanced Configuration
15
Dual-Band Wireless-N USB Network Adapter
Use the Push Button
Use the Push Button
Press the1. Wi-Fi Protected Setup button on the
router.
Within two minutes, click the 2. Wi-Fi Protected Setup
button
on this screen.
The Adapter connects to the network.3.
Connecting to the Network
Click 4. Print to print out your wireless network settings.
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Congratulations! The Adapter is connected to
the network.